轻型货架 Light shelf
Storage shelf heavy storage medium storage light combined rhombic hole iron shel
Light shelf structure

   1. The shelf column is made of equilateral angle steel with bilateral punching. The hole distance is arranged in a straight line with a distance of 50mm. The column hole is used to hang the laminate;

   2. The shelf steel laminate is made of cold-rolled steel plate, which is bent on four sides according to the required size.

   3. The rack is composed of columns and steel laminates connected and fixed through quick snap pins and triangular fixing pieces.

  after all parts are processed by static electricity, dried and Phosphated   and the finished products are finished by automatic powder processing and phosphating. The surface of the finished shelf products produced is smooth and beautiful; The laminate can be adjusted up and down freely, which is convenient for disassembly and assembly.

Scope of application

   it is usually used for the storage of small and medium-sized goods and light goods. The single-layer bearing capacity is preset within the range of ≤ 150kg.

Characteristics and Application

   light shelf is suitable for manual access to light goods. It can store many kinds of small products together with plastic turnover box. It is widely used in electronic industry and small parts warehouse. It can realize anti-static function by changing plastic spraying powder or laying special rubber plate. It has the characteristics of low cost, reliability, simple assembly and disassembly. Light warehouse shelf can be used alone, It can also be freely spliced into various arrangements.

It is convenient to connect the light-weight corner plate and the shelf with the light-weight corner plate by screws. The steel laminate or wood laminate of light warehouse shelf is adjusted up and down with a pitch of 50mm to meet a variety of use requirements.

   the light shelf steel laminate is bent by the cold plate on four sides according to the required size, and the concave stiffener is welded below. Spot welding is adopted for welding. This structure has the characteristics of material saving, good bearing condition and smooth surface. The wood laminate adopts density board, which also has the function of anti-static.